Babban Ingantacciyar Kauri Mai Kauri Epoxy Coal Tar Pitch Anticorrosive Paint

* Abubuwan Samfura:

★ Kyakkyawan juriya mai tasiri, juriyar mai da juriya na sinadarai;
★ Kyakkyawan juriya mai kyau, juriya bushe da rigar, kyakkyawan aikin bushewa da kyakkyawan aikin rigakafin tsatsa;
★ Yana da ƙarancin sha ruwa, kyakkyawan juriya na ruwa, juriya mai ƙarfi ga yashwar ƙwayoyin cuta da juriya ga shiga ciki;
★ Kyawawan kaddarorin jiki da na inji, kaddarorin kaddarorin lantarki, juriya na lalacewa, juriya na yanzu, juriya mai zafi da juriya na zazzabi.

* Aikace-aikacen samfur:

Ya dace da na ciki da na waje anticorrosion na bututu, kamar karfe bututu, jefa baƙin ƙarfe bututu da kankare bututu, wanda aka na dindindin ko partially binne a cikin ƙasa ko nutse a cikin ruwa.Hakanan ya dace da bututun gine-ginen masana'antar sinadarai, gadoji, layin dogo, tankunan kula da najasa da matatun mai.Da tankunan ajiyar karfe;tsarin siminti da aka binne, bangon ciki na gas, farantin ƙasa, chassis mota, samfuran siminti, tallafin ma'adanin kwal, wuraren ma'adinai na ƙasa da wuraren tashar ruwa, samfuran itace, tsarin ruwa, sandunan ƙarfe, jiragen ruwa, sluices, bututun zafi, bututun samar da ruwa , bututun samar da iskar gas, ruwan sanyi, bututun mai, da sauransu.

* Bayanan Fasaha:

Theoretical shafi amfani (kada a yi la'akari da bambancin shafi yanayi, shafi hanya, shafi dabara, surface yanayin, tsarin, siffar, surface area, da dai sauransu.)
Matsayi mai haske: na farko 0.23kg / m2, saman gashi 0.36kg / m2;
Matsayi na yau da kullun: na farko 0.24kg/m2, topcoat 0.5kg/m2;
Matsakaicin matsayi: na farko 0.25kg/m2, topcoat 0.75kg/m2;
Ƙarfafa darajar: mai farawa 0.26kg/m2, topcoat 0.88kg/m2;
Matsayin ƙarfafawa na musamman: na farko 0.17kg/m2, saman gashi 1.11kg/m2.

*Maganin saman:

Duk abubuwan da za a shafa su kasance masu tsabta, bushe kuma ba su da wata cuta.

• Oxidized karfe ne yashi yashi zuwa Sa2.5 grade, ko pickled, neutralized, da passivated;
• Karfe mara-oxidized an yi sandblasted zuwa Sa2.5, ko yashi zuwa St3 tare da ƙafafun ƙafar huhu ko na roba;
• Sauran saman Wannan samfurin ana amfani da shi a cikin wasu sassa, da fatan za a tuntuɓi sashen fasaha na mu.

*Hanyar Gina:

Fesa: mara iska ko iska.Ana ba da shawarar feshi mara iska mai ƙarfi.
Brush/Roll: Dole ne a cimma kaurin fim ɗin bushe da aka ƙayyade.

* Wuraren Gina:

1, farfajiyar weld na karfe dole ne ya kasance ba tare da gefuna ba, santsi, babu walda, ba burr;
2, lokacin da kauri shafi yi, shi ne mafi alhẽri ba drool, kullum ba bukatar ƙara thinner lokacin shirya, amma idan yanayi zafin jiki ne ma low, danko ne ya fi girma, za ka iya ƙara 1% ~ 5% na diluent, yayin da ake haɓaka wakili na warkewa;
3, a lokacin ginawa, kula da canje-canje a yanayin yanayi da zafin jiki, ruwan sama, hazo, dusar ƙanƙara ko zafi fiye da 80%, bai dace da ginin ba;
4, kauri daga cikin gilashin zane zai fi dacewa 0.1mm ko 0.12mm, da latitude da longitude yawa ne 12 × 10 / cm2 ko 12 × 12 / cm2 girman defatted alkali-free ko matsakaici-alkali gilashin zane, da damp gilashin zane. ya kamata a gasa Za a iya amfani da shi kawai bayan bushewa;
5, Hanyar cikawa: haɗin gwiwa na Layer anti-corrosion Layer da anti-corrosion Layer na bututun jiki ba kasa da 100mm ba, da kuma jiyya na farfajiyar haɗin gwiwa yana buƙatar isa St3, gogewa kuma babu datti;
6, cika hanyar rauni: da farko cire lalatawar lalatawar da aka lalata, idan ba a fallasa tushe ba, to kawai ana buƙatar cika murfin, an cika gilashin gilashin ragar saman saman;
7, dubawa na gani: dole ne a duba bututun fentin daya bayan daya, kuma murfin anti-lalata yana da santsi, babu wrinkles da iska.Duban rami: Ana iya gano shi ta hanyar gano leak ɗin wutar lantarki.Matsakaicin matsakaici shine 2000V, ƙimar ƙarfafawa shine 3000V, ƙimar ƙarfafawa ta musamman shine 5000V, kuma matsakaicin walƙiya ba ya wuce 1 a kowane 45m2, wanda ya cancanta.Idan bai cancanta ba, dole ne a maido ramin.

* Adana da Sufuri:

Wannan samfurin yana ƙonewa.An haramta yin harbi ko shigar da shi cikin wuta yayin gini.Saka kayan kariya.Yanayin ginin ya kamata ya kasance da iska mai kyau.Ka guji shakar tururi ko hazo mai fenti yayin gini kuma ka guji saduwa da fata.Idan fentin ya fantsama cikin bazata a fata, nan da nan a wanke shi da ma'aunin tsaftacewa mai dacewa, sabulu, ruwa, da sauransu. Wanke idanunku sosai da ruwa kuma ku nemi likita nan da nan.

* Kunshin:

Topcoat: 20Kg/Guga;Wakilin Magani/ Mai taurin: 4Kg/Guga
Maɗaukaki: 20Kg/Guga;Wakilin Magani/ Mai taurin: 4Kg/Guga