Fenti Mai Juriyar Wuta Mai Tsanani Na Musamman Don Tsarin Karfe Hoton da Aka Fito

Fenti mai juriya ga wuta mai ƙarfi na musamman don tsarin ƙarfe

Takaitaccen Bayani:

Tsarin ƙarfe mai laushi mai ƙarfiwani sabon samfuri ne mai inganci wanda ya dace da muhalli wanda aka haɓaka a ƙarƙashin ƙasan GB14907-2018. Ya haɗa da tushen ruwa da na narkewa.

Aika mana imel

Ƙarin Bayani

*VIDEO:

* Tsarin Samfuri:

Rufin yana da ƙarfin ɗaurewa sosai, ana iya shirya shi da launuka iri-iri, kuma yana dakyawawan tasirin adoIdan goga mai fenti ya kasance a saman tsarin ƙarfe, zai iya taka rawarkariya daga wuta, hana lalatawa da kumaadoIdan aka ci karo da wutar, saman murfin zai faɗaɗa da sauri don samar da wani tsari mai kama da juna mai kauri wanda ke hana wuta da kuma hana zafi, ta haka ne zai cimma tasirin kariyar wuta na tsarin ƙarfe.

* Siffar Samfura:

Rufin ƙarfe mai siriri wanda ke hana wuta shinemafi siriria cikin nau'in murfin da ke hana wuta, murfinkamanni yana da kyau, kuma juriyar tsatsa na tsarin ƙarfe ya fi kyau.

* Aikace-aikacen Samfura:

Ana amfani da shi sosai a cikinTsarin ƙarfe na cikin gida da wajekamar wuraren wasanni da nishaɗi, masana'antu, tashoshi, filayen jirgin sama, jiragen ruwa, da sinadarai.

* Bayanan Fasaha:

A'a.	Abu	Daidaitacce
1	Sanya a cikin akwati	Babu cake, yanayin daidaitacce bayan an juya
2	Bayyana da launi	kamanni iri ɗaya bayan bushewa
3	Lokacin bushewar saman, h	≤8
4	Ƙarfin haɗin gwiwa, Mpa	≥0.2
5	Juriyar ruwa, h	≥ awanni 24, babu wani Layer, babu kumfa kuma babu zubarwa.
6	Iyakar juriyar wuta, h	0.5h	1h	1.5h	2h
7	Kauri na fim	1.0mm	1.6mm	2.4mm	3.3mm
8	Rufewa	1.8-2kg/㎡/mm

* Gina Samfura:

1. Da fatan za a yi maganin da ake buƙata na substrate kamar gogewa, gogewa da kuma gogewa, sannan a shafa fenti mai hana lalatawa kamar fenti mai cike da zinc ko fenti mai kama da epoxy mio.

2. A tabbatar an haɗa fenti sosai kafin a yi amfani da shi.

3. Don Allah kar a yi amfani da wannan samfurin idan danshi ya kai RH>90 ko T <5℃.

4. Ba a yarda da aikin walda ko wuta ba kafin murfin ya bushe da tauri.

*Lokacin Tazara Mai Rufi Biyu:

Zafin jiki	5℃	25℃	40℃
Mafi ƙarancin lokaci	Awa 24	18h	6h
Mafi tsawo lokaci	Babu iyaka

*Maganin saman jiki:

Dole ne dukkan saman ya kasance mai tsabta, bushe kuma babu gurɓatawa. Kafin a yi fenti, ya kamata a tantance shi kuma a yi masa magani daidai da ƙa'idar ISO8504:2000.

*Yanayin Gine-gine:

Zafin tushe bai gaza 0℃ ba, kuma aƙalla sama da zafin wurin raɓa na iska 3℃, ɗanɗanon dangi na 85% (ya kamata a auna zafin jiki da ɗanɗanon dangi kusa da kayan tushe), hazo, ruwan sama, dusar ƙanƙara, iska da ruwan sama haramun ne a yi su.

*Fintin Taimako:

Za a yi amfani da alkyd primer ko epoxy zinc rich primer, epoxy primer, da kuma saman coat ɗin a matsayin alkyd topcoat, enamel, acrylic topcoat, acrylic enamel da sauransu.

*Fakitin Samfura:

20Kg, 25Kg/ Bucket ko Musamman

Kayayyaki Masu Alaƙa

Fenti Mai Jure Wutar Itace Mai Ruwa Mai Inganci
Resistance na Weather M Film Foda Wuta Resis ...
Fenti Mai Juriya Ga Wuta Na Waje Don Met...
Fenti Mai Jure Wuta Mai Ruwa Mai Intumescent